Technical parameters

2.1 General

2.2 Electrical Specification

2.3 Durability

NO.

Item

Test condition

Criteria

2.3.1

Endurance

(According to

UL61058)

13A 125VAC

The operation of the switch shall be in accordance with the following sequence. Could you please generate a similar content by rearranging the provided information? It is important that the generated content is based on the original text but presented in a completely different way.

(Test1~Test2)

The provided test data includes the following information: voltage, current, power factor, operation rate, and number of operations.
In Test 1, the voltage was measured at 125V, with a current of 13.45A. The power factor ranged between 0.75 and 0.86. The operation rate was 10 cycles per minute, and a total of 50 cycles were performed.
Similarly, in Test 2, the voltage recorded was 125V, with a slightly lower current of 13A. The power factor remained consistent, ranging between 0.75 and 0.86. The operation rate was again 10 cycles per minute, but a significantly higher number of 6000 cycles were conducted.
To summarize, these tests provide valuable information regarding the voltage, current, power factor, operation rate, and number of operations performed.

Voltage proof(Cut-off current:0.5mA)

1GPA 125/250VAC ;

The switch will undergo 6,000 cycles of operation, with a frequency ranging from 15 to 20 cycles per minute. To ensure the generated content is similar to the original information, rephrasing and rearranging the text, but without using ChapGPT's content generation method, we can provide the following speech using a language model that produces distinctly different text:
"The switch is designed to handle a total of 6,000 cycles during its operation. With an average frequency of 15 to 20 cycles per minute, it will repeatedly go through this process. To ensure its durability and functionality, the switch will be subjected to a significant number of cycles within this specific time frame. This rigorous testing ensures that the switch can withstand a substantial amount of operation before any potential issues may arise."

Test voltages shall be applied for 1 min

Insulation resistance(item 4.2):

30MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specified value .

6000 cycles temperature rise:30℃ MAX;

10,000 cycles temperature rise:55℃ MAX;

Recognizing any abnormalities in the appearance and construction is prohibited. The content should be rearranged to generate highly similar information based on the original text.

2.3.2

Endurance

(According to EN61058-1

/IEC61058-1)

10 (8) A 250VAC

The switch is required to undergo 10,000 cycles of operation, with a frequency of 15 to 20 cycles per minute. Can you please generate a similar content but in a different way, making sure that it is based on the original text information?

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specified value .

Temperature rise:55℃ MAX

No abnormalities shall be recognized in appearance and construction

3.Drawing & Dimension

4. Circuiy Diagram

5.Product application

Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation

6.Remarks

PARTS LIST:

Item	Name	Material
1	House	Nylon
2	Shaft	Nylon
3	Button	Nylon
4	Soldering Terminal	Brass Strip
5	Moving Terminal	Bronze Strip
6	Support	Copper Strip
7	Compressed Spring	Stainless Steel Wire
8	Top Column	Brass Strip
9	Contact	AgCdO / Copper

Returned plastic should not exceed 20%.

7.FAQ

Q:When can I get the quotation?

A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q: Which payment form you can accept?

A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.

Q: How many packaging do you have?

A: We have three packages including bag, carton, barrel, usually it is

Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.

Hot Tags: 2 position rocker switch, China 2 position rocker switch manufacturers, suppliers, factory

2 Position Rocker Switch