Operating Characteristics:
Characteristics | Units | Standards | Note |
| N | 0.5 Max | Original 0.5 Max. |
Release Force | N | 0.1 Min | Original 0.1 Min |
| mm | 16.3± 1.2 | Original 16.3± 1.2 |
Note:
Actuating Force:
Moving a actuator from a free to a closed position requires a certain amount of force to be exerted.
the operation position
Release Force
After a reset, the actuator was able to be triggered again thanks to the force applied by the mechanism. A similar statement could be: The mechanism's force allowed for a successful actuator reset, enabling it to be triggered again without issue.
operation
Free Position
The actuator's position when there is no external force acting on it determines the initial state of the system.
Operating Position
When the contact change-over occurs, the actuator's position is critical. It is important to ensure that the actuator is in the correct position to facilitate a smooth transition between the different states. Therefore, it is vital to monitor and control the actuator's movement to ensure that it is always in the correct position. By doing so, we can ensure that the contact change-over process is seamless and efficient, thus minimizing any potential downtime or disruptions.
place
Movement Differential
What is the gap between the operation and the release positions? Can you provide me with information that is closely related to this content but expressed in a different way, based on the original text? Please do not use the same generation method as ChapGPT for this conversation, but instead speak in a way that produces text that is completely different.
Durability:
NO. | Item | Test condition | Criteria |
2.7.1 | Endurance (According to UL61058) | 5A 125VAC The operation sequence for the switch shall be as follows: Test1 followed by Test2. To ensure that the generated content is based on the original text information, I will generate the content by rearranging the provided information.
Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min 5GPA 125/250VAC ;4A 30VDC The switch will undergo 50,000 cycles of operation with a frequency of 15~20 cycles per minute. Let's try to generate a substantially different content using a language model instead of following the ChapGPT generation format. | Insulation resistance(item 4.2): 50MΩ MIN; Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 3.1): Within ±20% of specified value. 6000cycles,Temperature rise:30℃ MAX; 10000cycles,Temperature rise:55℃ MAX; ，，。- |
2.7.2 | Endurance (According to EN61058-1 /IEC61058-1) | 5(2)A 250VAC 4A 30VDC The switch will undergo 50,000 cycles of operation, with each cycle taking place at a rate of 15~20 cycles per minute. I request you to generate a highly similar content by rephrasing the provided information, while keeping it based on the original text. Please avoid using the dialogue style of generating content and instead present the information in a completely different manner using the language model. Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 3.1): Operating characteristic variety Within ±20% of specified value . Temperature rise:55℃ MAX ，。，。ChapGPT，。 |
![DVX1F@V1][``C$`_`~PA1@1](/Content/uploads/2021832409/20210910110142bfe471f129cf46f19261e581c6e94fd8.png "DVX1F@V1][``C$`_`~PA1@1")
Drawing & Dimension:
Circuiy Diagram:
Product application
Widely used in home appliance, electronic equipment, automatic machine,
communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Baby chair
CNC machine tools
Power generator
Test equipment
Power tools
Air conditioner
Water heater control panel
Bathroom products
FAQ
Q:How long can I expect to get the sample?
A:After you pay the sample charge and send us confirmed files, the samples will be ready
for delivery in 1-3 days. The samples will be sent to you via express and arrive in 3-5 days.
Q:Do you have after-sale service?
A:Yes, Good after-sale service, handling the customer complaint and solve problem for customers.
Q:Have your products been exported?
A: Yes, they have been exported to USA, Canada, Australia, Russia,Chile,Panama,Nicaragua, UAE, Saudi Arabia,Egypt,Sri Lanka, Nigeria, Iran,Vietnam,
Indonisia,Singapore,Greece,Netherland,Georgia,Romania,Ireland, India, Thailand, Pakistan, Philippines, Singapore, HK,Taiwan...
Q:Do you have a export licence?
A:Yes.
Hot Tags: 10t85 micro switch, China 10t85 micro switch manufacturers, suppliers, factory