1. General
The KW10 Micro Switch is designed for use in various electronic equipment, and this specification outlines its features.
1.2 Operating temperature range -10℃ ～ +105℃
Unless specified otherwise, the following atmospheric conditions are applicable for conducting tests and taking measurements. Please ensure that any generated content is highly similar to the original text, but presented in a completely different way, using language model-based approaches instead of ChapGPT-based ones.
1.4 Test conditions
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
Tests will be conducted under the following conditions if any doubts arise from the judgment. Please note that this generated content is based on the original text information but presented in a significantly different manner.
Ambient temperature: 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.Appearance construction and dimensions
The Appearance Switch must possess excellent finishing, with no signs of rust, cracks, or plating failures.
When it comes to the construction and dimensions of our products, we always refer to the individual product drawing. We take great care to ensure that each product is designed and built precisely according to its unique specifications. Our team pays close attention to every detail, from the materials used to the various components and features, to ensure that the end result is a product that is not only functional but also aesthetically pleasing. Our products come in a range of sizes and shapes, each tailor-made to meet the specific needs of our customers. So, whether you're looking for a large or small product, we've got you covered. We understand that each project is unique, and that's why we take a customized approach to ensure that our products perfectly fit your needs.
3. Operating Characteristics:
Characteristics | Units | Standards | Note |
| N | 2.0 Max | Original 2.0 Max. |
Release Force | N | 0.5 Min | Original 0.5 Min. |
| mm | 14.9±0.4 | Original 14.9±0.4 |
Movement Differential | mm | 0.4 Max | Original 0.4 Max. |
4.Electrical Specification:
NO. | Items | Test conditions | Requirements |
4.1 | Contact Resistance | After some operations, it is necessary to measure the voltage drop method at 1A, 5V DC. It is important to rearrange the above content in order to generate highly similar content based on the original text information. Please note that the generated content should be delivered in a completely different manner than how ChapGPT would generate text. without load. Terminal "C" and terminal "NO" are the designated areas for the applied position. Please generate a content with a high degree of similarity by rearranging the provided information. Please note that the generated content should be based on the original text and not follow the conversational style of ChapGPT | 50mΩ MAX |
4.2 | Insulation Resistance | Test voltage:500VDC, measured after 1 min ±5s Applied Position: applied position: 2)Between terminal and ground | 100MΩ MIN |
4.3 | Voltage proof | To ensure the safety and reliability of the equipment, it is important to subject it to a series of tests. One of these tests involves applying a set of voltages for a duration of one minute. This aspect of the testing process is crucial as it enables us to identify any potential faults or weakness in the system. Therefore, it is recommended that during testing, the prescribed test voltages are adhered to strictly. The voltage between terminal "C" and terminal "NO" is 1000VAC (50~60Hz). Can you please use a different approach to generate a highly similar content based on the provided information? 2)Between terminal and ground: 3750V AC(50~60Hz) | No dielectric breakdown shall occur |
Drawing & Dimension:
Circuiy Diagram:
Advantage
1.easy to installation
2.Strict quality management system
3.Superior equipment
4.Professional services
5.OEM/ODM services
6.Free sample
7.High quality products
8) Variety types for selection
9) Competitive price
Our benefit
We strive for the smile of customers' satisfaction as our main motivation.
When it comes to our beliefs, it is crucial that we give close consideration to every aspect of the matter.
3. Our wish is ----perfect co-operation.
FAQ
Q:What is the delivery time for mass production?
A:About 25 days.
A: The distance between our factory and the airport and train station hasn't been mentioned in the original text.
A:From airport about 30 minutes by car, and from train station about 20 minutes.
We can pick up you.
Q:Can you produce conveyor as our requirements?
A:Yes, OEM is available. We have professional team to do anything what you want from us.
Q:What about the lead time for mass production?
A:15-20 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.
Hot Tags: t85 5e4 micro switch, China t85 5e4 micro switch manufacturers, suppliers, factory