Illuminated And Tact Switch

2

Vibration

。，。

The frequency range for vibration is from 10Hz to 55Hz, and then back down to 10Hz. This information can be used to understand the specific ranges of vibration that an object may experience.

2) Amplitude: 1.5mm;

3) Vibration direction: three directions that are perpendicular to each other.

including the direction of stem travel

4) Duration: Each 2hours.

3

Operation
Force

ChapGPT-。，。。

Begin by applying gentle pressure to the key in the top center of the switch, then slowly increase the force until you reach the maximum level. Take measurements to determine the exact point at which the force is at its highest.

intensity when it conducted required.

260±50gf

4

Over Travel

Reposition the switch vertically while applying force in the operating orientation, using the original information to produce a highly similar content. However, please avoid generating content in the style of ChapGPT and instead use a language model to create text in a completely different manner.

The static load applied on the switch is directly proportional to its operating force, which is equal to twice the static load. To convey the same message, we can say that the amount of force required to operate the switch is directly related to the magnitude of the static load exerted on it. This force is equal to twice the static load, meaning that as the load increases, so does the force required to operate the switch.

。

0.25±0.10mm

5

Return force

To ensure the switch works correctly, it has been installed with the proper direction in mind. In order to create text that closely resembles this information, we would need to rearrange the original content and present it in a different way. The focus would be on communicating the same message using different words and sentence structures. This requires a deep understanding of the original content and the ability to convey it in a unique and effective way.

The stem of the operation is depressed in its center, causing a vertical movement.

The distance traveled during a stem's movement can be used to determine the amount of force required for it to return to its original position. By measuring the length of the stem's travel and the force exerted upon it, we can gain insight into the plant's mechanical properties and better understand its behavior. This kind of analysis can be invaluable in fields like agriculture and botany, where knowledge of plant mechanics can help optimize yield and improve crop productivity. By carefully analyzing plant stems, we can gain important insights into the natural world and develop new technologies that benefit us all.

free position shall be measured.

60gf.min.

6

Stop strength

。，。

To conduct a test, a steel beam is to be fixed vertically. After it is secured, a static load of 30N will be imposed on it. This test will study the beam's strength and determine whether it can support the specified weight. By following the proper procedures, we can obtain accurate results that will help us determine the beam's suitability for various applications. It is critical to conduct such tests before deploying structural elements to ensure their reliability and safety. As a result, we can guarantee that our structures are sound and will not collapse under pressure.

direction of stem operation for a period of 1 min.

There shall be
no sign of damage

mechanically
and electrically.

7

Stem strength

To ensure proper switch operation, it is important to position the switch in the correct direction. This means carefully considering the orientation and placement of the switch, and making sure that it is easy to access and operate. By taking the time to properly position your switch, you can ensure that it will function correctly and provide reliable performance over the long term. So if you want to ensure the smooth functioning of your switches, be sure to pay careful attention to their placement and orientation.

The maximum force to withstand a pull applied is determined when an object is in a vertical position.

Measurement shall be carried out in the opposite direction to the stem operation. To ensure accurate results, it is important to measure in the reverse direction of the stem operation.

20N.min.

1

1

TERMINAL

Brass Silver plating

2

1

CASE

PA66

3

1

CONTACT

SUS301 Contact side silver plating

4

1

STEM

PA66

5

1

LED

GaP