Technical parameters
2.1 General
The KW10 Micro Switch, designed for electronic equipment, is subject to the specifications outlined in this document. To create a corresponding text, the original information must be rearranged while maintaining its accuracy. It is important to note that the content generated should not follow the same pattern as that produced by ChapGPT but instead, use a language model to generate unique content.
2.1.2 Operating temperature range -25℃ ～ +125℃
In the absence of any specific instructions, the conditions in which measurements and tests are conducted shall adhere to the following atmospheric parameters: ... It is recommended that the text be rephrased rather than simply rearranged to produce highly similar content. Further, it is important to speak in a manner that is distinct from that of ChapGPT-generated text.
2.1.4 。，。
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In case of any uncertainty arising from the verdict, certain tests need to be carried out under specific conditions. To ensure accuracy and clarity, these tests are imperative and must be conducted for a comprehensive understanding of the situation.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimensions
The Appearance Switch must have excellent finishing, with no rust, cracks, or plating failures.
Product drawings provide information about the construction and dimensions of a specific item. By referring to these drawings, users can gain a detailed understanding of how the product is built and its physical measurements. To generate highly similar content, the original text information should be restructured while preserving the meaning.
2.3 Operating Characteristics
Characteristics | Units | Standards | Note |
Actuating Force | N | 0.2-0.45 | Original 0.45 Max |
Movement Differential Travel | mm | 0.8 Max | Original 0.8 Max |
Operating Position | mm | 8.9±0.8 | Original 8.9±0.8 |
Free Position | mm | 12.0 Max | Original 12.0 Max |
Note：
Actuating Force:
The force required to move the actuator from the free to
the operation position
Release Force
The force allowed the mechanism to reset actuator after
operation
Free Position
The position of the actuator when no external force is applied
Operating Position
The position of the actuator when contact change-over take
place
Movement Differential
The distance between operation and release position
2.4 Durability
NO. | Item | Test condition | Criteria |
2.4.1 | Endurance (According to UL61058) | 1/4hp 250VAC Switch shall be operated according to following sequence (Test1~Test2) VoltageCurrentPower FactorOperation RateOperation CyclesTest 1125V17.4 A0.4-0.56-10cycles/min50cyclesTest 2125V2.9A0.75-0.86-10cycles/min6000cycles5GPA 125/250VAC; 4A 30VDC Operating Cycles：50,000 cycles Operation Frequency：15~20 次/min Voltage proof：Test voltage shall be applied for 1 min（50~60Hz, Cut-off current:0.5mA) | Insulation resistance(item 4.2): 50MΩ MIN； Voltage proof: Terminaland terminal:1000VAC No dielectric breakdown shall occur.
Operating characteristic (item 5.1): Within 20% of specified
6000 cycles temperature rise: 30℃ MAX； 50000cycles temperature rise: 55℃ MAX； No abnormalities shall be recognized in appearance and construction |
2.4.2 | Endurance (According to EN61058-1 /IEC61058-1) | 5A 250VAC Operating Cycles：50,000 cycles Operation Frequency：15~20 次/min Voltage proof：Test voltage shall be applied for 1 min（50~60Hz, Cut-off current:0.5mA)
| Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1125VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Within 10%,-30% of specified Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.Drawing & Dimension
4. Circuiy Diagram
5. Our service
Ø Provide the technical design and solutions;
Ø Supply accessories at any time;
Ø Tele-technical consulting and services;
Ø Other special technical service according to client’s requirements.
6.FAQ
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: micro switch with tuv, China micro switch with tuv manufacturers, suppliers, factory