Technical parameters
2.1 General
The scope of this specification is limited to Push Button Switches that are utilized in electronic equipment. To ensure the accuracy of the generated content, it must be based on the original text information while being presented in a highly similar manner. Please note that the content should not be produced using the same method as ChapGPT, but instead, different language models must be utilized to generate a completely distinct set of text.
2.1.2 Operating temperature range 0℃ ～ +85℃
In the absence of any specific instructions, the conditions under which measurements and tests are conducted should follow the following atmospheric requirements:
，。，，。
。，，。，、。
，，。、、，。
，。，。
，。，，。，，。
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In the event that there is any uncertainty regarding the judgment, it will be necessary to carry out tests under specific conditions. It is important that the tests are conducted in order to provide further clarity on the matter at hand.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimensions
The Appearance Switch must have a high-quality finish and should be free from any signs of rust, cracks or plating damages.
The construction and dimensions of the products can be found in their respective product drawings. To provide you with accurate information, please refer to the specific drawings for detailed specifications.
2.3. ELECTRICAL SPECIFICATION
NO. | Items | Test conditions |
2.3.1 | Contact resistance | The contact resistance should be 50mΩ(Max). |
2.3.2 | Insulation resistance | A minimum of 100MΩ is expected when measuring with 500V DC for 1 minute. This is the standard for testing the insulation resistance. |
2.3.3 | Dielectric strength | AC 2000V,1min.(before endurance test) AC 1500V,1min.(after endurance test) |
2.4 MECHANICAL CHARACTERISTICS
Item | Description | Test Conditions |
2.4.1 | Operating Force | 200gf±100 |
2.4.2 | Operating Life | The mechanical life all of 50 000 cycles |
2.4.3 | Contact Spacing | Min. 3.0mm (IEC61058) |
2.5 Durability:
NO. | Item | Test condition | Criteria |
2.5.1 | Endurance (According to UL61058) | 3A 120VAC 1A 250VAC Switch shall be operated according to following sequence (Test1~Test2) VoltageCurrentPower factorOperation rateNumber of operationTest1120V3A0.75-0.86-10cycles/min50cyclesTest2120V3A0.75-0.86-10cycles/min6000cyclesVoltage proof(Cut-off current:0.5mA) 3A 120VAC 1A 250VAC Switch shall be operated 50,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . 6000 cycles temperature rise:45℃MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
2.5.2 | Endurance (According to EN61058-1 /IEC61058-1) | 3A 120VAC 1A 250VAC Switch shall be operated 50,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specifiedvalue . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3. DRAWING & DIMENSION
4.Product application
Enormous remote
controller and portable remote controller
Instrumentation
Medical equipment
Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls
Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls
Public building, Home security, Business building, Industrial equipment…etc.
5.Remarks
PARTS LIST:
NO. | NO. | NAME | MATERIAL |
1 | 1 | Case | Glass filled Nylon 6/6 flame retardant,heat stabilized(UL94V-0) |
2 | 1 | plunger | Glass filled Nylon or Glass filled polyester |
3 | 1 | housing | Stainless steel |
4 | 1 | contact | Brass,with Sliver plate over nickel plate |
5 | 1 | Terminal | expoxy |
Returned plastic should not exceed 20%.
6.Delivery,shipping and service
7.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: waterproof momentary push button switch, China waterproof momentary push button switch manufacturers, suppliers, factory