Technical parameters
Note:
Actuating Force:
The actuator requires a certain amount of force to be moved from its free position.
the operation position
2.4 Electrical Specification
NO. | Items | Test conditions | Requirements |
2.4.1 | Contact Resistance | The voltage drop method will be used to measure the power consumption at 12A and 24VDC, following a series of operations with no load. The information from the original text has been rearranged to form a similar statement. Applied position: Between terminal and terminal | 30mΩ MAX |
2.4.2 | Insulation Resistance | Test voltage:500VDC, measured after 1 min ±5s The position applied for is between terminals. Please produce a greatly comparable content by rearranging the original information, ensuring that the generated content is based on the given text. Do not engage in a dialogue based on content generated by ChatGPT - instead, deliver a speech using a language model that is completely different. 2)Between terminal and ground | 100MΩ MIN |
2.4.3 | Voltage proof | To conduct a proper test, it is necessary to apply certain voltages for a duration of 1 minute. This step is crucial in ensuring accurate readings and reliable results. Therefore, it is important to follow the specified test voltages and maintain their application for the recommended time frame. (Cut-off current:0.5mA) To ensure safe operation, it is essential to test the electrical insulation strength between terminal and terminal. The recommended voltage for this test is 2000VAC per minute, at 50-60Hz frequency. It is crucial to strictly adhere to these testing protocols. The withstand voltage between the terminal and ground is 2500VAC per minute, with a frequency range of 50 to 60 Hz. Please produce text that closely reflects the information presented here, with appropriate rephrasing and reorganization. Please note that the generated content should be significantly distinct from that produced using ChapGPT dialogue generation. | No dielectric breakdown shall occur |
2.5 Welding Characteristics
2.5.1 |
Solder ability | Switch test under such conditions and inspect after. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
The area of dip tin should capture the 95% impregnated area |
2.5.2 |
Resistance to soldering heat |
The switch will be inspect under such conditions below Temperature and impregnated time Trial measuretemperature（℃）Time（s）Slot welding method260±55±1Soldering method350±53±0.5
|
All of the appearance, motor functions, electrical properties are no abnormal. |
3.Drawing & Dimension
4. Circuiy Diagram
5.Product application
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
6.Remarks
PARTS LIST:
Item | Name | Material |
1 | House | Nylon |
2 | Shaft | Nylon |
3 | Button | Nylon |
4 | Soldering Terminal | Brass Strip |
5 | Moving Terminal | Bronze Strip |
6 | Support | Copper Strip |
7 | Compressed Spring | Stainless Steel Wire |
8 | Top Column | Brass Strip |
9 | Contact | AgCdO / Copper |
Returned plastic should not exceed 20%.
Hot Tags: 3 position rocker switch, China 3 position rocker switch manufacturers, suppliers, factory