Technical parameters
2.1 General
2.1.1 Operating temperature range -25℃ ～ +105℃
In the absence of any specific instructions, all measurements and tests should be performed under the following atmospheric conditions:
In order to properly test a system or device, certain conditions must be met. These conditions may vary depending on the specific test being conducted, but typically involve controlling various factors that could affect the outcome of the test. Examples of test conditions could include maintaining a certain temperature or humidity level, ensuring the system is properly calibrated, and using standardized testing procedures. It is crucial to carefully define and adhere to test conditions in order to ensure accurate and reliable results. It is also important to note that test conditions may need to be adjusted based on factors such as location or time of day, and that they should always be well-documented for future reference.
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In case of any uncertainty arising from the decision, certain assessments must be carried out under specific circumstances.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance, construction and dimensions
2.2.1 Appearance
The finishing of the switch should be excellent, without any signs of rust, cracks, or plating failures.
Please refer to the product drawing for information on the construction and dimensions. The individual product drawing provides detailed specifications regarding these aspects.
2.3 Operating Characteristics:
Characteristic | Unit | Standard | Note |
| N | 4±1.5 Max | Original 4±1.5 . |
Contact Force | N | 0.4 Min | Original 0.4 Min |
| mm | 3 Min | Original 3 Min |
2.4 Electrical Specification:
Item | Test condition | Requirement | |
2.4.1 | Contact Resistance | Shall be measured at 12A 24VDC by voltage drop method after some operations without load. Applied position: Between terminal and terminal | 30mΩ MAX |
2.4.2 | Insulation Resistance | Test voltage:500VDC, measured after 1 min ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground | 100MΩ MIN |
2.4.3 | Voltage proof | Following test voltages shall be applied for 1 min. (Cut-off current:0.5mA) 1)Between terminal and terminal :2000VAC/min (50~60Hz) 2)Between terminal and ground: 2500VAC/min (50~60Hz) | No dielectric breakdown shall occur |
2.5 Environment Resistance:
3.Drawing & Dimension:
4. Circuit Diagram:
5.Product application
6.Remarks
7.FAQ
Q: When can I get the quotation?
A: We usually quote within 24 hours upon your inquiry. If it is urgent, please tell us so that we will prioritize your inquiry.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc.
Q: What is your favorite song lyric?
A: Moon river, wider than a mile. I'm crossing you in style, someday.
Q: What types of packaging do you have?
A: We have packaging including bag, carton and barrel.
Q: Would you have a discount if l have a large order?
A: Yes we could offer different discount according to your order quantity.
For 27 years, SWITECH ELECTRONICS CO.,LTD has been specialized in manufacturing miniature switches applied in a variety of appliances, such as Micro switch, Tactile switch, Waterproof switch, Rotary switch, Rocker switch, Slide switch, Toggle switch, Push button switch, etc. Our clients include Panasonic, Siemens, Whirlpool, Electrolux, Eaton, Emerson. In order to be more competitive in price, our company opened its factory in China, 2003. Today, we have 1050 employees to sincerely provide our service from the factory in Taiwan, and 2 factories in Chinese Mainland. Annual output has reached 200 million pcs.
Hot Tags: illuminated rocker-switch, China illuminated rocker-switch manufacturers, suppliers, factory