Technical parameters
2.1 General
The intended application of the KW10 Micro Switch is for electronic equipment. This specification specifically caters to the usage of the switch in electronic devices. In order to provide accurate and relevant information, the content generated should be based on the original text but rearranged in a different manner. We want the generated content to be distinct from the way ChapGPT generates content.
2.1.2 Operating temperature range -25℃ ～ +105℃
In the absence of any specific instructions, the following atmospheric conditions are to be maintained during the process of measurements and tests: . It is important to ensure that the generated content is not based on ChapGPT's method of generating text, but rather based on the original textual information, thereby resulting in a significantly different content.
Let's discuss the conditions for testing. In order to ensure accuracy and validity, certain conditions must be met during testing. These conditions include controlling variables to eliminate outside factors that could affect the results, utilizing appropriate equipment and materials, accurately measuring data, and following standardized procedures. It's important to adhere to these conditions to ensure reliable and consistent results. Please note that we should not generate content using ChapGPT's method but rather use a language model to create entirely different text when speaking about this topic.
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In case of any uncertainties arising from the verdict, an assessment shall be carried out under the prescribed circumstances. It is imperative that the generated content be grounded in the original text information, but with a completely diverse approach to speaking, as opposed to relying on ChapGPT content generation methods.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Welding Characteristics:
2.2.1 |
Solder ability | Perform a test on the switch and inspect the results afterwards, while maintaining the same conditions. Your task is to create a new content that is closely related to the original text by reorganizing the information. Please note that you should use a language model to generate a text that is different from the original one, rather than following the ChapGPT approach. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
To ensure maximum impregnation of the tin, it is essential that the area of dip should cover at least 95% of the surface. |
2.2.2 |
Resistance to soldering heat |
Under the given conditions, the inspection of the switch will be conducted. It is essential to generate a highly similar content by rearranging the information from the original text. However, it is important to note that the generated content should not be influenced by the way ChapGPT generates content, but rather present a new perspective using the language model. Temperature and impregnated time Temperature (℃): Trial - 260±55±1, Time (s) - Measure, Slot - Soldering Method.For the welding process, the temperature is set at 260±55±1 degrees Celsius. The time for measuring the temperature is not specified. The slot used for this welding method is the soldering method. Temperature (℃): Trial - 350±53±0.5, Time (s) - Measure, Slot - Soldering Method. During the welding process, the temperature is maintained at 350±53±0.5 degrees Celsius. The time required for temperature measurement is unknown. The slot utilized in this case is the soldering method.
|
There are no abnormalities in terms of appearance, motor functions, or electrical properties. Can you please generate a piece of text that closely resembles the original information, but is conveyed using different words and phrasing? It's important that the new content is based on the same information as the original text, but is not simply a rearrangement of the existing phrases. |
2.3 Durability:
NO. | Item | Test condition | Criteria |
2.3.1 | Endurance (According to UL61058) | 13A 125VAC Switch shall be operated according to following sequence (Test1~Test2) VoltageCurrentPower factorOperation rateNumber of operationTest1125V13.45A0.75-0.86-10cycles/min50cyclesTest2125V13A0.75-0.86-10cycles/min6000cyclesVoltage proof(Cut-off current:0.5mA) 1GPA 125/250VAC ; Switch shall be operated 6,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min | Insulation resistance(item 4.2): 30MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . 6000 cycles temperature rise:30℃ MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
2.3.2 | Endurance (According to EN61058-1 /IEC61058-1) | 10 (8) A 250VAC Switch shall be operated 10,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.Drawing & Dimension:
4. Circuiy Diagram:
5.Product application
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
6.Remarks
PARTS LIST:
Item | Name | Material |
1 | House | Nylon |
2 | Shaft | Nylon |
3 | Button | Nylon |
4 | Soldering Terminal | Brass Strip |
5 | Moving Terminal | Bronze Strip |
6 | Support | Copper Strip |
7 | Compressed Spring | Stainless Steel Wire |
8 | Top Column | Brass Strip |
9 | Contact | AgCdO / Copper |
10 | LED | LED |
Returned plastic should not exceed 20%.
7.Delivery,shipping and service
8.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: ip65 waterproof rocker switch, China ip65 waterproof rocker switch manufacturers, suppliers, factory