Technical parameters
2.3 Operating Characteristics
Note:
Actuating Force:
To move the actuator from the free position, a certain amount of force is necessary. This force is dependent on various factors such as the size of the actuator, the load it is carrying, and the distance it needs to travel. Generally speaking, the force required will need to overcome any friction between the actuator and its surrounding components as well as the resistance of the load. Therefore, it is important to carefully calculate the required force beforehand in order to ensure that the actuator operates smoothly and efficiently.
the operation position
2.4 Welding Characteristics
2.4.1 |
Solder ability | Perform a test on the switch while the conditions are in place, and then proceed to inspect it afterward. Your task is to create a new piece of content that closely resembles the original, but using different phrasing and wording. Please refrain from using ChapGPT to generate the content and instead rely on your own language skills to produce an entirely unique piece. 1）Variable temperature range ：235±5℃； 2）Dip time：3±0.5s； |
To ensure that the captured area of dip tin meets the 95% impregnation requirement, it is essential to carefully consider and plan the area in question. |
2.4.2 |
Resistance to soldering heat |
Under the following circumstances, the switch will undergo inspection: Temperature and impregnated time We need to measure the temperature in degrees Celsius for a specific amount of time in seconds, using either slot welding or soldering methods. The temperature range for slot welding should be 260±5, whereas for soldering, it should be 350±0.5. These parameters will ensure optimal results for our application.
|
There are no anomalies detected in any of the appearance, motor functions, or electrical properties. This indicates that everything seems to be working just fine and there are no noticeable issues to report. It's important to stay vigilant and continue monitoring these areas in order to ensure that everything stays in top working condition. |
2.5 Durability
NO. | Item | Test condition | Criteria |
2.5.1 | Endurance (According to UL61058) | 13A 125VAC Switch shall be operated according to following sequence (Test1~Test2) VoltageCurrentPower factorOperation rateNumber of operationTest1125V14A0.75-0.86-10cycles/min50cyclesTest2125V13A0.75-0.86-10cycles/min6000cyclesVoltage proof(Cut-off current:0.5mA) 1GPA 125/250VAC ; Switch shall be operated 6,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min | Insulation resistance(item 4.2): 30MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . 6000 cycles temperature rise:30℃ MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
2.5.2 | Endurance (According to EN61058-1 /IEC61058-1) | 10 (8) A 250VAC Switch shall be operated 10,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.Drawing & Dimension
4. Circuiy Diagram
5.Product application
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
6.Delivery,shipping and service
7.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: waterproof rocker-switch, China waterproof rocker-switch manufacturers, suppliers, factory