Technical parameters
2.1 General
The SK22D Slide Switch is intended for use in electronic equipment and this specification applies to it. You can create similar content by reorganizing the information provided in the original text. However, please avoid using the dialogue generation method of ChapGPT and instead opt for language model-generated content that's significantly different from the original text.
2.1.2 Operating temperature range -16℃ ～ +60℃
Unless stated otherwise, measurements and tests should be conducted under the specified atmospheric conditions. It is important to adhere to these conditions in order to obtain accurate and reliable results.
。，，。、、。
。，。，，。
。：
1. ：。，，。
2. ：。。。
3. ：。。
4. ：，。。
，，。，。
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In case any uncertainty arises from the judgment, certain conditions must be met for tests to be conducted. The following conditions have been established to ensure accuracy and reliability in evaluating the matter at hand.
2.2 Operating Characteristics:
NO. | ITEM | TEST CONDITIONS | PERFORMANCE |
2.2.1 | OPERATING FORCE | The measurement should be taken at either the nearest point of the component or at a point 3mm away from the tip of the actuator (knob), with a height of 5mm. Let's generate a completely different content using the language model. | 250gf±100gf |
2.2.2 | TERMINAL STRENGTH | The terminal shall be subjected to a static load of 500gf for a duration of 15 seconds in any direction. Let's discuss the generated content from a different perspective, rather than relying on the manner in which ChapGPT generates content. | To ensure the actuator remains secure, both mechanical and electrical characteristics must be met without any looseness. |
2.2.3 | DISPLACEMENT OF ACTUATOR（KNOB） | A STATIC LOAD OF 10N（1Kgf）SHALL BE APPLIED TO THE TOP OF THE ACTUATOR(KNOB) AND THEN DISPLACEMENT SHALL BE MEASURED TO THE DIRECTION OF THE ARROW. | THE LEVER SHALL HAVE NO SERIOUS DEFORMATION AND FUNCTION IS NORMALLY. |
2.3 Electrical Specification:
NO. | ITEM | TEST CONDITIONS | PERFORMANCE |
2.3.1 | CONTACT RESISTANCE | MEASURED AT 1 KHz SMALL CURRENT(100 mA OR LESS) | 100mΩ MAX |
2.3.2 | INSULATION RESISTANCE | APPLY A VOLTAGE OF 500V DC SHALL BE APPLIED FOR 1 MIN AFTER WHICH MEASUREMENT BE MADE: (1) BETWEEN TERMINAL. (2) BETWEEN INDIVIDUAL TERMINAL AND FRAME. | 100MΩ MIN |
2.3.3 | DIELECTRIC STRENGTH | AC 500V rms(50~60Hz) FOR 1 MIN TRIP CURRENT: 0.5 mA (1) BETWEEN TERMINAL. (2) BETWEEN INDIVIDUAL TERMINAL AND FRAME. | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC. |
2.4 Storage Method:
(1) IF DON'T USE THE PRODUCT IMMEDIATELY,STORE IT AS DELIVERED IN
THE FOLLOWING ENVIRONMENT: WITH NEITHER DIRECT SUNSHINE NOR
CORROSIVE GAS AND IN NORMAL TEMPERATURES. HOWEVER, IT IS
RECOMMENDED THAT YOU SHOULD USE IT AS SOON AS POSSIBLE BEFORE
SIX MONTHS PASS.
(2) AFTER BREAK THE SEAL，IT SHOULD PUT THE REMAINING IN A
PLASTIC BAG TO SEPARATE IT FROM THE OUTSIDE AND STORE IN THE
SAME ENVIRONMENT MENTIONED ABOVE. YOU SHOULD USE IT UP AS
SOON AS POSSIBLE.
(3) DO NOT STACK TOO MANY SWITCHES FOR STRAFE.
3.Drawing & Dimension:
4. Circuiy Diagram:
5.Product application
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
6.Remarks
PARTS LIST:
NO. | Quantity | Name | Material | Color |
1 | 1 | KNOB | PA46 | Black |
2 | 1 | Cover board | SUS301/304 | Silvery |
3 | 1 | Plastic Base | LCP | Black |
4 | 3 | Terminal | phosphor copper | Silvery |
5 | 1 | CONTACT CLIP | phosphor copper | Silvery |
Returned plastic should not exceed 20%.
7.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: 2 position slide switch, China 2 position slide switch manufacturers, suppliers, factory