Technical parameters
2.1 General
The 1AS3 Toggle Switch is designed for use in electronic equipment, and this specification applies specifically to its application. To maintain the original information from the given content, a highly similar content can be generated by rearranging the sentences and ensuring that the context remains intact.
2.1.2 Operating temperature range -30℃ ～ +85℃
Unless stated otherwise, the environmental conditions for conducting tests and measurements shall be as follows . It is necessary to create an analogous content by rephrasing the given text, making certain that the content generated retains the essential information from the original text but is not identical.
Let's discuss about test conditions - instead of using ChapGPT to generate content, let's try a different approach and rearrange the original text information to produce a highly similar content.
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
Tests shall be conducted under the following conditions if any doubts arise from the judgment. It is important to ensure that the generated content is based on the original information provided.
2.3 Operating Characteristics:
NO. | ITEM | TEST CONDITIONS | PERFORMANCE |
2.3.1 | Operating Force | The rubber handle is located 3mm away from the test point. The test will be conducted three times. Create a nearly identical passage by rearranging the aforementioned content, being certain that the new text accurately reflects the details of the original text. However, please do not utilize the ChapGPT method to generate the text. Instead, use a different language model to produce a completely unique response. | 200gf±100gf |
2.3.2 | Terminal Strength | It takes 15 seconds to complete a strength test of 500gf on any square type in the front row of feet. Can you come up with a similar content in your own style? | There are no mechanical and electrical abnormalities present in the terminals, such as cracks or loosening, which could affect their functionality and performance. It is ensured that the terminals meet the required standards for their mechanical and electrical properties. |
2.3.3 | Shank strength | The force of 1Kgf is applied at the front of the handle, and the displacement should be fixed along the direction of the mark. | There is no serious deformation of the handle, and it can work normally. |
2.4 Endurance
NO. | ITEM | TEST CONDITIONS | PERFORMANCE |
2.4.1 | Life Test | Measurement under the following test: （1） 5A 120VAC Resistive load - Plate with silver 2A 250VAC Resistive load - Plate with silver 0.4A 20VAC Resistive load - Plate with gold （2）Operating frequency：The frequency of 6-8 times per minute （3）Electrical life 6,000 make-and-break cycles. （4）Mechanical life 40,000 make-and-break cycles. | (1) contact resistance：10 mΩ MAX (2) insulation resistance： 1000 MΩ MIN (3) Insulation strength：1000V (4) After testing, the appearance is free from damage and meets mechanical properties. |
2.4.2 | Weldability test | The top of the terminal is immersed in the 2mm depth of the solder pool, the temperature is 230 + 5℃, and the time is 3 + 0.5 seconds. | The welding area should be more than 75%. |
2.4.3 | Solderability test | When hand welding, the temperature is controlled at 350 + 10 degrees, and the time is 3 + 0.5 seconds. However, abnormal pressure can not be applied to the feet. | There is no abnormal appearance, which is satisfied with mechanical and electrical properties. |
2.4.4 | Heat resistance test | It was placed at a temperature of 85 + 2℃, and then placed at normal room temperature for 1 hours after 96 hours. | |
2.4.5 | Cold tolerance test | It was placed at a temperature of -40 + 3℃, and then placed in normal room temperature for 1 hours after 96 hours. |
2.5 Storage Method:
（1）If the product is not used immediately, it should be kept at normal temperature without direct sunlight and corrosive gases.
In the environment. But we recommend that we use it as soon as 6 months.
（2）Put the finished products in plastic bags and seal them in the same environment as soon as possible, and use them as soon as possible. Do not overlay excess when saved in order to prevent the pressure from breaking.
（3）Do not overlay excess when saved in order to prevent the pressure from breaking.
3.Drawing & Dimension:
4. Circuiy Diagram
5.Product application
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
6.Delivery,shipping and service
7.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: on off on toggle switch, China on off on toggle switch manufacturers, suppliers, factory