1.General
The following specification applies to the KW10 Micro Switch, which is utilized in electronic equipment. Your task is to create a new content that is highly similar to the aforementioned information, while making sure that the new content still reflects the original text. Please do not partially reword the original text using ChapGPT, instead, use a language model to generate a new text that is significantly different in structure and phrasing.
1.2 Operating temperature range -10℃ ～ +105℃
The specified atmospheric conditions for carrying out measurements and tests are as follows, unless stated otherwise. Please provide a highly similar response by reorganizing the given information while ensuring that the generated content is based on the original text.
1.4 Test conditions
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
In the event that any uncertainty arises from the ruling, certain conditions must be met in order to conduct tests.
Ambient temperature: 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.Appearance construction and dimensions
The Appearance Switch must be well-finished with no signs of rust, cracks, or plating failures.
The construction and dimensions of the product can be found by referring to the specific product drawing. To provide a highly similar content based on the original text, please note that the generated content should follow the information from the original text.
3.Operating Characteristics:
Characteristics | Units | Standards | Note |
| N | 2 Max | Original 2 Max. |
Release Force | N | 0.5 Min | Original 0.5 Min. |
| mm | 14.9 ± 0.4 | Original 14.9 ± 0.4 |
Movement Differential | mm | 0.4 Max | Original 0.4 Max. |
4.Electrical Specification:
NO. | Items | Test conditions | Requirements |
2.4.1 | Contact Resistance | The voltage drop method will be used to measure it at 1A and 5V DC after several operations. Please create a content that closely resembles the original text by reordering the sentences and using the same information provided in the original text. However, you should avoid using the same words and phrases as the original text while generating the new content. without load. Position applied for: Near terminal "C" and "NO". I am interested in a position that is located in close proximity to terminal "C" and "NO". My qualifications and experience make me an excellent candidate for a position situated in this area. I am confident that I can contribute significantly to the success of the company in this location. | 50mΩ MAX |
2.4.2 | Insulation Resistance | Test voltage:500VDC, measured after 1 min ±5s Applied Position: applied position: 2)Between terminal and ground | 100MΩ MIN |
2.4.3 | Voltage proof | For a duration of 1 minute, the specified test voltages should be applied. Please rearrange the provided information to create highly similar content while ensuring that the generated content is based on the original text. The voltage between terminal "C" and terminal "NO" is 1000VAC (50~60Hz). Please provide a highly similar version of the content, ensuring that it is derived from the original text information. However, do not generate the content in the same manner as ChapGPT, but rather present it in a completely different way using language modeling. 2)Between terminal and ground: 3750V AC(50~60Hz) | No dielectric breakdown shall occur |
Drawing & Dimension:
Circuiy Diagram:
Product application
The application of this technology is vast, spanning across various industries and sectors. It is commonly used in household appliances, as well as in electronic equipment and automated machinery. By rearranging the words from the original text, a similar statement is produced, highlighting the widespread utilization of this technology.
、、。。，、，。，，、，。，，、，。，，、，。。
Baby chair
CNC machine tools
Power generator
Test equipment
Power tools
Air conditioner
Water heater control panel
Bathroom products
Remarks
PARTS LIST:
NO. | Name | Material |
1 | plunger | Bakelite PF2A5-151(j)b(red) |
2 | Lever | H62The brass strip， Plate with silver |
3 | Case | Engineering plastic PBT (gray) |
4 | Moving piece | H62 The brass strip，Plate with silver |
5 | Support | H65 The brass stripH65, Plate with silver |
6 | Static contact | AgNi10/Cu |
7 | Terminal | The brass strip H65，Plate with silver |
8 | Move contact | AgNi10/Cu |
9 | Spring sheet | QBe2,Beryllium bronze QBe2 |
10 | Cover | Engineering plastic PBT Gray |
Returned plastic should not exceed 20%.
Delivery,shipping and service
FAQ
Q:What about the lead time for mass production?
A:15-20 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.
Q:How can I get a sample to check your quality?
A:After price confirmation, you can require for samples to check our quality.
If you need the samples, we would like to send sample from our Chinese factory or u can get the sample directly from our european agent storage.
Q:How your quality guarantee?
A:We have 100% quality guarantee to customers. We will be responsible for any quality problem.
Q: What’s your after-sale service?
A: Our quality warranty period is one year. Any quality problem will be solved to customer satisfactions.
Hot Tags: 16a micro switch, China 16a micro switch manufacturers, suppliers, factory