Technical parameters
2.1 General
The KW10 Micro Switch is designed for application in various electronic equipment. This specification is specifically applied to ensure the effective functioning of the switch. Its purpose is to provide a highly reliable and responsive electronic component for use in different types of devices. Whether it is used in consumer electronics, industrial machinery, or automotive applications, the KW10 Micro Switch is engineered to meet the specific requirements and demands of each application. Its versatility and performance make it an ideal choice for integrating into various electronic systems.
2.1.2 Operating temperature range -25℃ ～ +105℃
Unless stated otherwise, the measurements and tests shall be conducted under the following atmospheric conditions. . To create a content with high similarity to the original text, try rephrasing the information provided in different words but maintain the same contextual meaning. Please refrain from using ChapGPT to generate the content and opt for a different language model to ensure a different style of writing while still be true to the original text.
2.1.4
，。。，、、、。
。，，，，。。
，。，，，。，，。
，，。，，，。
Ambient temperature 15~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
If doubts arise from the judgment, it is necessary to conduct tests under the following conditions in order to address them effectively.
Ambient temperature： 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Operating Characteristics:
Characteristics | Units | Standards | Note |
| N | 4±1.5 Max | Original 4±1.5 . |
Contact Force | N | 0.4 Min | Original 0.4 Min |
| mm | 3 Min | Original 3 Min |
Note:
Actuating Force:
The force required to move the actuator from the free to
the operation position
2.3 Electrical Specification
NO. | Items | Test conditions | Requirements |
2.3.1 | Contact Resistance | Shall be measured at 12A 24VDC by voltage drop method after some operations without load. Applied position: Between terminal and terminal | 30mΩ MAX |
2.3.2 | Insulation Resistance | Test voltage:500VDC, measured after 1 min ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground | 100MΩ MIN |
2.3.3 | Voltage proof | Following test voltages shall be applied for 1 min. (Cut-off current:0.5mA) 1)Between terminal and terminal :2000VAC/min (50~60Hz) 2)Between terminal and ground: 2500VAC/min (50~60Hz) | No dielectric breakdown shall occur |
2.4 Durability
NO. | Item | Test condition | Criteria |
2.4.1 | Endurance (According to UL61058) | 13A 125VAC Switch shall be operated according to following sequence (Test1~Test2) VoltageCurrentPower factorOperation rateNumber of operationTest1125V13.45A0.75-0.86-10cycles/min50cyclesTest2125V13A0.75-0.86-10cycles/min6000cyclesVoltage proof(Cut-off current:0.5mA) 1GPA 125/250VAC ; Switch shall be operated 6,000 cycles at 15-20 cycles/min. Test voltages shall be applied for 1 min | Insulation resistance(item 4.2): 30MΩ MIN Voltage proof: Terminal and ground:1000VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . 6000 cycles temperature rise:30℃ MAX; 10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction |
2.4.2 | Endurance (According to EN61058-1 /IEC61058-1) | 10 (8) A 250VAC Switch shall be operated 10,000 cycles at 15~20 cycles/min Voltage proof(Cut-off current:0.5mA) Test voltages shall be applied for 1 min. | Insulation resistance(item 4.2): 50MΩ MIN Voltage proof: Terminal and terminal:750VAC Terminal and ground:1500VAC No dielectric breakdown shall occur. Operating characteristic (item 5.1): Operating characteristic variety Within ±20% of specified value . Temperature rise:55℃ MAX No abnormalities shall be recognized in appearance and construction |
3.Drawing & Dimension
4. Circuiy Diagram
5.Product application
Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation
6.Delivery,shipping and service
7.FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q：Would you have a discount if l have a large order?
A：Yes we could offer different discount according to your order quantity.
Hot Tags: on off on rocker switch, China on off on rocker switch manufacturers, suppliers, factory