2.2. ELECTRICAL SPECIFICATION
NO. | Items | Test conditions | Requirements |
2.2.1 | Contact | The voltage drop method should be used to measure the small current (100 mA or less) at 1KHz after carrying out certain operations without any load. Let's try to generate a significantly different content by rearranging the given information. Applied position: Between terminal and terminal | 50mΩ MAX |
2.2.2 | Insulation | Test voltage: 100VDC, measured after 60 ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground | 100MΩ MIN |
2.3. ENVIRONMENT RESISTANCE:
NO. | Items | Test conditions | Requirements |
2.3.1 | Low Temperature | After testing at -20±3℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. | (1)Contact resistance: 200mΩ MAX
(2)Insulation resistance: 50MΩ MIN
(3)Voltage proof: No dielectric breakdown shall occur.
(4)Operating characteristic: Operating characteristic variety Within ±10% of specified value .
No abnormalities shall be recognized in appearance and construction. |
2.3.2 | High Temperature | After testing at 70±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. | |
2.3.3 | Steady Damp-heat | After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. | |
2.3.4 | Change of temperature | After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed. | |
2.3.5 | Salt mist | he switch shall be checked after following test: 1) Temperature: 35℃±2℃ 2) Salt solution : 5±1%(solids by mass) 1) Time: 24±1 hour After test，salt deposit shall be removed by running water.
|
2.4 DURABILITY
|
Life Test | An actuator shall be with a thrust of no great than 1 times switch power to 10,000 cycles. At a speed of 30 cycles for 1 minutes. |
1)Contact resistance: 2) 200mΩ MAX 3)Life time:10,000 cycles |
2.4.2 | Stem Strength | And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds. |
3. DRAWING & DIMENSION:
4.Product application
1.Digital Products: digital camera, digital video, etc.;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA, etc.;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning, etc.;
5.Security Products: visual interphone, monitor, etc.;
6.Toys: electric toys, etc.;
7.Computer Products: PC camera, etc.;
8.Exercises Machines: treadmills, massage armchair, etc.;
9.Medical Device: sphygmomanometer, thermometer, hospital call system, etc.;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector, etc.;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
5.Remarks
PARTS LIST:
NO. | Name | Material |
1 | Base | LCP-Black |
2 | Top Cover | LCP-Black |
3 | Handle | LCP-White |
4 | Terminal | Copper allpr |
Returned plastic should not exceed 20%.
6.Delivery,shipping and service
Hot Tags: 4 pins dip switch, China 4 pins dip switch manufacturers, suppliers, factory